|
 | BERNINA 1150MDA
Superb quality overlocker with
differential feed and.......
Micro Thread Control mtc
|
|
 | New!
Micro Thread Adjustment
Prevents loose stitching on fabric edge and stops curling on finer fabrics
One simple control takes care of the adjustment.
This can also be incorporated with the cutting blade for a wider, more secure seam or finish. Great on jeans or soft furnishing projects.
And of course, being able to easily reduce settings down for delicates, means that you'll achieve superb results on fashion fabrics, satins, bridal gowns, sportswear and more
|
|
 |
Built-in Needle Threading
Just lay your thread into the guides, pull down on the threader lever and your needles are threaded in an istant!.
In addition:-
the 'Swing-Out' presser foot will make threading your overlocker even easier (see below)
|
|
 | 'Swing-Out' presser foot
No more fumbling!
Just push the foot out of the way….no more frustration when threading or changing your needles....no more dropping needles inside your machine - because the foot was in the way.
So easy to operate.
Just push the foot to the left when you want it out of your way, simply push back to the right for the sewing position.
|
|
 | Easy Looper Threading
Just lay the thread into the guide, push the lever, and it's done! On many overlockers, threading the back of the looper is a real pain; not so with this simple and clever built-in threading aid
It's as easy as 1 - 2 - 3
1/
Pull down on the white lever
2/
Place the thread into the guide
3/
Hold onto the thread and push the
white lever back up into position.
It's that easy. No more having to be a contortionist when you want to re-thread your machine
And no more putting off thread changing because you always found it so frustrating.
|
|
 | Quick change to rolled hemming
At a flick of the lever, you can easily convert from overlock to a rolled hem and back again without changing the stitch plate or presser foot. |
|
 | Quality Engineering
Beautifully built with its solid metal block casting and precision engineered components. The all metal Cintered bearings keep oiling points to a minimum.The 1150MDA is incredibly smooth running and quiet.... It’s a real gem to use!
|
|
 |
They're just where you need them!
The tools (those you’re always looking for just when you really need them) are safely stored in the front cover.
|
|
 | For Your Safety
Both front cover and bed have a built-in safety device. Should either be left open or not properly shut, then the machine will not operate.
|
|
 | Sew 2, 3 or 4 threads
Using one or two needles, you can get exactly the stitch you want by taking advantage of 2, 3 or 4 thread overlocking.
Bernina Overlockers use standard domestic sewing machine needles - which are always readily available |
|
 |
The two-thread stitch is perfect for sewing narrow seams and delicate rolled hems.
And for those really special effects, use decorative threads, yarns or cord for results that will really stand out. |
|
 |
Make short work of seaming knits, finishing edges and completing decorative rolled hems using the secure three-thread stitch.Talk about a smooth operator, this overlocker cuts, sews and finishes your fabric edges -- all in one pass. |
|
 |
When your project calls for sturdy construction, seaming woven fabrics or using special techniques like gathering or applying elastic, the four-thread stitch is just what you need.
A four thread seam has greater elasticity, so it's ideal for swim and sportswear; especially where fabrics such as Lycra are used |
|
| The two-thread stitch is perfect for sewing narrow seams and delicate rolled hems. | |
|
| Make short work of seaming knits, finishing edges and completing decorative rolled hems using the secure three-thread stitch.Talk about a smooth operator, this overlocker cuts, sews and finishes your fabric edges -- all in one pass. | |
|
| When your project calls for sturdy construction, seaming woven fabrics or using special techniques like gathering or applying elastic, the four-thread stitch is just what you need. | |
|
